Go to main section Go to footer
This action will scroll the page to the content
Close dialog
Tooltip.
Hammer Strength

HD Elite iD Combo Rack

Take your training to the next level with the powerhouse of any facility—HD Elite iD Combo Racks.  With a wide range configurability, these racks allow multiple athletes to train on both the front and back of the rack, unlocking endless training possibilities.

HD Elite iD - Half-Half Combo Rack with Double Storage_92479875123

HD Elite iD

HALF / HALF COMBO RACK

The HD Elite iD Half / Half Combo Rack combines two Half Racks with the option to use a single or double storage upright in the middle. This rack allows two athletes to train at the same time in a package as compact as 53” (135 cm) for the total footprint when bolted to the floor.

HD Elite iD - Half-Power Combo Rack with Double Storage_9283749283

HD Elite iD

HALF / POWER COMBO RACK

The HD Elite iD Power / Half Combo Rack combines a Power Rack and a Half Rack with the option to use a single or double storage upright in the middle. This rack allows multiple athletes to train at the same time and provides plenty of space for bench depth, attachment storage and spotter access.

HD Elite iD - Power-Power Combo Rack with Double Storage_83294729834

HD Elite iD

POWER / POWER COMBO RACK

The king of all combo racks, the HD Elite iD Power / Power Combo Rack combines two Power Racks with the option to use a single or double storage upright in the middle. This rack allows multiple athletes to train at the same time and provides plenty of space for all your training needs.

Add-Ons

LIGHTNING ARMS

Lightning Arms are Hammer Strengths version of the popular Jammer Arms for racks. Lighting Arms attach to Hammer Strength racks in both upper and lower mounting positions to provide the ability to perform many traditional pushing and pulling movements without sacrificing valuable floor space. Each arm has multiple handle angles based on Hammer Strength’s Ground Based Jammer and Ground Based Squat Lunge to ensure users have the right grip for all movements. The Lightning Arms are incredibly light and can be mounted and dismounted quickly with our simple twisting mechanism—no tools required. Bar supports sold separately.

HD-Elite-ID_Utility-Band-Pegs_82u3498

UTILITY BAND PEG​S

Utility Band Pegs come as a pair and are used for high, mid or low band training and band storage.  Whether it’s on the front, rear or side of the rack, there’s no limit to how and where these can be used.   Each peg comes equipped with a Hammer Strength Lock Knob so that it stays securely in place during training and is easy to move when adjusting its position.  Pegs and HS Lock Knob can also lock Bar Catches in place.

HD-Elite-ID_Power-Pivot_9iqoweu0j9834

POWER PIVOT

The Power Pivot bolts to any Hammer Strength rack and provides a rotating mount that can be used both pushing and pulling barbell movements. Designed with a multi-bushing swivel joint, movement in all directions feels fluid and seamless—just as it should during training. When not in use, the Power Pivot is hardly noticeable and tucks tightly against your rack. Olympic Bar not included.

HD-Elite-ID_Nordic-Ham_340u293

NORDIC HAMSTRING

The Nordic Hamstring is a modular add-on that packs a ton of versatility into a small package. Designed with comfort, style and function, this add-on features a 5½” thick, injection-molded pad that provides sturdy and reliable support during exercise. The Nordic Ham can be positioned low for posterior chain development or high for single leg exercises inside or outside the rack. It comes with a Hammer Strength Lock Knob so that it stays securely in place during training and is easy to move when adjusting its position. When not in use, the Nordic Hamstring can be stored nicely on a crossmember or in the Utility Storage Post.

HD-Elite-ID_Battle-Rope-Anchor_823u42893u4234

BATTLE ROPE ANCHOR

The Battle Rope Anchor is a mounting point that allows for rope training. It has a 1"-diameter, chrome-plated ring that is gentle on the battle rope but creates a stable hold during high-intensity rope training. The Battle Rope Anchor is modular and can connect to any crossmember or upright with holes spaced at 6” on center. Battle Rope not included.

HD-Elite-ID_Utility-Storage-Post_02934820934823

UTILITY STORAGE POST

Utility Storage Posts come as a pair and act as a universal, multi-directional storage solution for add-ons. With the ability to go almost anywhere on your rack, you can place these however you’d like along training or storage uprights to give you the ultimate storage flexibility. Starting as a simple suggestion, this add-on turned into something you can never have enough of on your rack—more storage.

HD-Elite-ID_Flexible-Bar-Catch_234u2394u2034

FLEXIBLE BAR CATCH

Flexible Bar Catches help ensure a safe training zone when lifting inside a power rack. Designed with reinforced nylon, these straps disperse the impact of a drop on the rack and prevent knurling damage to bars. The front and back of the straps can be offset for the bar to roll away if dropped when squatting. When not in use, these straps can be rolled up and easily stored.

HD-Elite-ID_Bull-Horn_9034982039482

BULL HORN

A Hammer Strength original, the Bull Horn has many storage capabilities and can fit multiple plate sizes on its dual-weight horn structure. While a single Bull Horn can be used for efficient change-plate storage, several Bull Horns positioned on a storage upright (combo racks only) provide a 90° plate storage solution, allowing for greater storage capacity and easily accessible loading / unloading of plates.

HD-Elite-ID_Dock-N-Lock_02394823948

DOCK N' LOCK

Another Hammer Strength original, the Dock N’ Lock was created to ensure a bench is centered and locked in place when being used in a rack. With 9 different adjustments in 1” increments, the Dock N’ Lock provides the right amount of depth adjustability to lock in your bench for precise positioning. This add-on mounts to the lower Spider Gusset crossmember in the back of a rack and is reversible to accommodate platform inserts.

HD-Elite-ID_Spotter-Platform_982347928374

SPOTTER PLATFORMS

Spotter Platforms are the perfect tool for assisting others on big lifts. Coming as a pair, the Spotter Platforms attach directly to HD Elite iD training uprights and provide a high point for spotters to stand on. This add-on also features a chrome pin and large paint guards to protect the rack's finish. When not in use, Spotter Platforms can be flipped and stored snugly against the upright to create additional clearance for squatting or walking through the rack.

HD-Elite-ID_HS-Lock-Knob_029348029348

HAMMER STRENGTH LOCK KNOB

Hammer Strength Lock Knobs allow users to quickly and easily remove and/or change the location of different modular add-ons, such as the Modular Power Pivot, Utility Peg and Nordic Ham. Each Knob features an inset screw to minimize hardware exposure and paint marring on your uprights. The Knobs also include a small, heavy-duty magnet near the base of the Knob, which reduces lost knobs and allows you to store them when not in use

HD-Elite-ID_Dual-Bar-Hanger_823u49283423

DUAL BAR HANGER

The low-profile Dual Bar Hangar holds two Olympic bars vertically by their sleeves and mounts to the top crossmember of any Hammer Strength Rack. This add-on features 3 storage hooks for added storage. Each Dual Bar Hanger has a chrome-plated finish and was designed to help shield the rack finish from being scratched. (1 included with every HD Elite iD Rack)

HD-Elite-ID_Single-Bar-Hanger_29348209348

SINGLE BAR HANGER

Meant to hold a single Olympic bar vertically by its sleeve, this low-profile bar hanger can be mounted on the crossmember of any Hammer Strength Rack. This add-on is finished with a matte charcoal powder coat and was designed to help shield the rack finish from being scratched.

HD-Elite-ID_Low-bar-storage_09384209348

LOW BAR STORAGE

Hammer Strength’s Low Bar Storage is a convenient, low-profile bar storage solution. Inside the sleeve is a plastic guard to help protect Olympic Bars when dropped into the storage cylinder. The cylinder is angled slightly away from the rack to ensure the bar won't contact the rack and damage its finish.

Not compatible with Platform Insert.

HD-Elite-ID_Modular-Power-Pivot_982934234

MODULAR POWER PIVOT

Similar to Hammer Strength's flagship bolt-on Power Pivot, the Modular Power Pivot provides a rotating mount for both pushing and pulling barbell movements. But this add-on can be placed almost anywhere on the rack. The modularity provides athletes the ability to adjust the position quickly to perform sport specific movements. This add-on comes equip with a Hammer Strength Lock Knob so that it stays securely in place during training and is easy to move when adjusting its position. When not in use, it can be stored on a crossmember or a Utility Storage Post. Olympic Bar not included.

HD-Elite-ID-Standard-Weight-Horn

STANDARD WEIGHT HORN

With Hammer Strength's Standard Weight Horns, weight plates can be conveniently positioned on the storage uprights of a rack without needing a separate storage unit taking up valuable floor space. Each Standard Horn has a 7” (18 cm) length and is chrome plated for a premium finish and a smooth transition when sliding plates on and off. Standard Weight Horns sold in pairs.

HD-Elite-ID_XL-Weight-Horn_2342345

XL WEIGHT HORN

Large XL Weight Horns allow for convenient weight plate storage on the uprights of a rack without needing a separate storage unit taking up valuable floor space. Each XL Horn has an 11” (28 cm) length and is chrome plated for a premium finish and a smooth transition when sliding plates on and off. XL Weight Horns sold in pairs.

HD-Elite-iD-Custom-Plates_9834729834

CUSTOM ANVIL PLATES

The rigidity of your rack is incredibly important, but so is the power of your branding. We elevated our signature Anvil Plates—which provide our HD Elite iD racks with Zero Deflection Technology—with the ability to place your logo on them.

With this new customization option, you can proudly show not only the unparalleled robustness of these racks, but also your unique brand identity from all viewing angles.

HD-Elite-iD-Custom-Sign_924715971235

CUSTOM SIGNS

The ability to add Custom Signs has been a staple of Hammer Strength racks. So, we optimized our signs to bolt directly to the gussets of our rear crossmember, giving you the ability to add a custom sign easily without complicating your pull-up options.

Hammer Strength signs are standard, but customizing these signs with your logo helps bring your brand and HD Elite iD racks to life. Time to make a statement that is both powerful and unforgettable.

Speak with a Sales Consultant

Marketing Opt-In
Privacy *
black-rectangle

HD ELITE iD

HD Elite iD - Standard Half Rack with Accessories - Iso (1)

Hammer Strength

HD Elite iD Half Rack

HD Elite iD - Standard Power Rack with Accessories - Iso (1)

Hammer Strength

HD Elite iD Power Rack

HD Elite iD - Half-Half Combo Rack with Single Storage Transparent

Hammer Strength

HD Elite iD Combo Rack

black-rectangle

HAMMER STRENGTH BENCHES & PLATFORMS

HD Athletic NX University 1

HD ATHLETIC NX

With nearly limitless configurability, a premium look, and the rugged durability that Hammer Strength is known for, HD Athletic NX can grow with your weight room and your strength program.